Buy DJI Matrice 300 RTK Industrial Drone | D1 Store

Name: Matrice 300 RTK
Brand: DJI

Overview.

The DJI Matrice 300 RTK platform is designed with extensive system and sensor redundancies to maximize flight safety and reliability. These redundancies and safety mechanisms include: dual flight control system sensors, dual control signal links, dual intelligent batteries, dual transmission links, obstacle sensor system redundancies, and three-propeller emergency landing. is a new standard for the commercial drone industry. It is DJI's latest commercial drone platform that takes inspiration from modern aviation systems. Offering up to 55 minutes of flight time, advanced AI capabilities, 6 directional sensing & positioning and more. The M300 RTK sets a whole new standard by combining intelligence with high performance and unrivalled reliability.

The M300 RTK has become the industry standard whereby different payloads for different RPAS missions can be easily adapted and controlled through the Skyport and M300 platform. If there is a specific use case, there will most likely be a specific payload ready to go. For example, some payloads include spotlights, thermal cameras, droppers, speakers, LiDAR and much more!

What's new?

▪ 55 Minute maximum flight time.

▪ 15 m/s maximum wind resistance & 23 m/s maximum speed.

▪ Fits up to 3 payloads with dual downward and single upward gimbal mount.

▪ AI Intelligence for easier operations including smart pin and track & Waypoints 2.0

▪ Dual Operators to allow the transfer of controls for extended operations.

▪ IP45 ingress protection.

See it in action.

Features.

Flight performance.

The DJI M300 RTK has a redesigned airframe and propulsion system that gives you a far more efficient and stable flight. It has been thoroughly tested through the harshest of conditions and represents of the toughest enterprise drones on the market.

Reliable range.

The all-new OcuSync Enterprise enables transmission up to 15 km away and supports triple-channel 1080p video along with real-time auto-switching between 2.4 GHz and 5.8 GHz. This is a significant improvement over the previous airframes and enables more reliable flight near high-interference environments along with AES-256 encryption for secure data transmission.

Intelligent views.

Configure your M300 RTK to fit your mission needs. Mount up to 3 payloads simultaneously, with a maximum payload capacity of 2.7 kg. Enjoy third party payloads at D1 Store as well such as loud speakers, water samplers, spotlights and lots more!

Automation.

Record mission actions such as aircraft movement, gimbal orientation, photo shooting, and zoom level to create sample mission files for future automated inspections.

Automate routine inspections and capture consistent results every time. Onboard AI recognizes the subject of interest and identifies it in subsequent automated missions to ensure consistent framing.

Data Collection.

Smart Pin and Track
Mark an object in camera or map view with a quick tap, and advanced sensor fusion algorithms will immediately calculate its coordinates, which are projected to all camera views as an AR icon. The location of the subject is automatically shared with another remote controller, or to online platforms such as DJI FlightHub.

SmartTrack
Identify and follow moving subjects like people, vehicles, and boats with the Smart Track function, where auto-zoom is applied for steady tracking and viewing. The subject’s dynamic location is continuously acquired and shared to another remote controller or to DJI FlightHub

Waypoints 2.0

Create up to 65,535 waypoints and set multiple actions for one or more payloads, including 3rd party ones, at each waypoint. Flightpath planning is also optimized to maximize flexibility and efficiency for your missions

Obstacle Avoidance.

To enhance in-flight safety and aircraft stability, dual-vision and ToF sensors appear on all six sides of the aircraft, offering a maximum detection range of up to 40 m, with options to customize the aircraft’s sensing behavior via the DJI Pilot App. Even in complex operating environments, this 6 Directional Sensing and Positioning system helps keep the aircraft and the mission safe.

Redundancy

The Matrice 300 RTK platform is designed with extensive system and sensor redundancies to maximize flight safety and reliability. These redundancies and safety mechanisms include: dual flight control system sensors, dual control signal links, dual intelligent batteries, dual transmission links, obstacle sensor system redundancies, and three-propeller emergency landing.

Explore M300
Payloads

Shop Now >

Which enterprise drone is
right for you?

(Coming Soon)

Shop with Confidence.

Australia's Leading Enterprise Dealer

Our Enterprise team are dedicated to providing you with the best service and price on all your DJI enterprise needs from RPAS to Payloads to Software. With our conveniently located enterprise hubs around Australia, our product specialists will be with you and your company every step of the way from finding the right drone to maintence. Enjoy exclusive services with D1 Enterprise such as Rentals, Repairs, Training and Maintenance.

General FAQ

What is the ingress protection rating of the M300 RTK? Can I fly in the rain?

The Matrice 300 RTK has a protection rating of IP45. However, the protection rating is not permanently effective and may decrease due to wear and tear. Do not fly in rain heavier than 100mm/24h.

How long does it take to fully charge two TB60 Intelligent Flight Batteries?

Batteries? With 220V power supply: It takes about 60 minutes to fully charge two TB60 Intelligent Flight Batteries; and about 30 minutes to charge them from 20% to 90%.

How many batteries can the Battery Station charge at the same time?

time? It can simultaneously store eight TB60 Intelligent Flight Batteries and four WB37 Intelligent Batteries. It can charge two TB60 Intelligent Flight Batteries and one WB37 Intelligent Battery at the same time. Batteries with the highest battery levels will be recharged first, followed by the ones with lower levels.

Can the TB60 Intelligent Flight Battery be used in low-temperature environments?

The operating temperature of the TB60 Intelligent Flight Battery is -20°C to 50°C. When the battery is used in a low-temperature environment, note that the battery life will be reduced. To optimize performance in the cold, it is recommended to warm the battery up to 15 °C before use.

When charging the batteries in an environment between -20 °C and 5 °C, the self-heating function will be activated to raise the battery's temperature to above 5 °C.

Once installed on the aircraft and the power is turned on, if the battery’s temperature is low, it will automatically self-heat to keep the temperature at about 16 °C to 20 °C.

Operation + Safety

Can the drone take off when two batteries are at different battery levels?

The M300 RTK can take off if the voltage discrepancy of the two batteries is within 0.7 V. If it is unable to take off, the app will inform you that “the power discrepancy in the two batteries is too large”.

How can I Improve the signal and transmission range?

The antennas of the controller are located in the smartphone clamp and they need to pointed directly at the aircraft, therefore you may need to tilt your controller depending how far away the drone is.

Turn off any unnecessary Bluetooth, mobile data and WiFi from both the phone and neighbouring devices, such as phones, smart watches and other remote controlled devices.

Ensure to pilot from areas with height. For example if there is a valley and a hill, the Hill will provide better transmission distance due to the surrounding environment.

Does the DJI Smart Controller Enterprise support 4G dongles?

Yes. It supports the ZTE MF833V dongle.

Can I HDMI out from the controller? If not, how can I?

The Smart Controller does support HDMI out so you can stream to a broadcasting software or to another screen such as a TV or monitor.

Camera + Intelligent Features

How many payloads can be mounted at the same time?

M300 RTK can carry 3 payloads at the same time using the dual downward gimbal connector and the upward gimbal connector.

What payload configurations does the M300 RTK support?

The M300 RTK supports the following payload configurations:

Single downward gimbal: Zenmuse XT2, Zenmuse XT S, Zenmuse Z30, Zenmuse H20, Zenmuse H20T, and third-party payloads developed on PSDK.

Dual gimbals: Zenmuse XT2 + Zenmuse Z30; Zenmuse XT2 + Zenmuse H20; Zenmuse XT S + Zenmuse Z30; Zenmuse XT S + Zenmuse H20; and one of the above single gimbal with a third-party payload developed on PSDK

Three gimbals: one of the above dual gimbal configurations + a third-party payload developed on PSDK

Note: The Zenmuse XT2 can only be mounted on the right downward gimbal port (Left and right are determined from the perspective of looking directly at the drone from the front).

Can I control multiple gimbals simultaneously?

You can control the movements of each gimbal simultaneously, but you can't take photos/videos simultaneously..

How does the M300 RTK acquire real-time differential data?

The M300 RTK obtains real-time differential data in the following two ways:

1. By connecting to the D-RTK 2 Mobile Station (RTCM3.2)

2. By connecting the remote controller to an NTRIP network RTK service through a 4G dongle or a WiFi hotspot (supports RTCM3.0/RTCM3.1/RTCM3.2)

Which SDKs are available on the M300 RTK?

M300 RTK supports DJI Onboard SDK, Payload SDK, and Mobile SDK.

Accessory Compatibility

Is the M300 RTK compatible with the D-RTK 2 Mobile Station for the M210 RTK V2 or the one for Phantom 4 RTK?

Yes. Please refer to the user manual of the M300 RTK and upgrade the firmware of the D-RTK 2 Mobile Station. Please note that different modes need to be selected when using the Mobile Station with the M210 RTK V2, Phantom 4 RTK, or M300 RTK. The D-RTK 2 mobile station only supports one of the three models at a time. For more details, please refer to the user manual.

Matrice 300 RTK