Emlid Reach

Emlid Reach Australia — RTK GNSS at D1 Store

Emlid Reach all-band RTK GNSS receivers give survey and drone teams centimetre ground control — from the pocket RX2 rover to the camera-equipped RS4 Pro. D1 Store stocks genuine Reach Main Items for Australian enterprise mapping crews alongside DJI Matrice, Terra and D-RTK workflows, with Price Match and local support.

What is Emlid Reach?

Reach RS4 and RS4 Pro are base-and-rover multi-band receivers (672 channels, L1/L2/L5/L6 class tracking) with IMU tilt compensation. RS4 Pro adds dual cameras for AR stakeout and image-based measurement. Reach RX2 is the compact rover for NTRIP network RTK when you do not need an on-site radio base.

Emlid Reach key specs at a glance

Spec Detail GNSS channels 672 Constellations GPS, GLONASS, Galileo, BeiDou, QZSS, NavIC Bands All-band class tracking including L5 / L6 where supported RTK accuracy H: 7 mm + 1 ppm; V: 14 mm + 1 ppm Tilt compensation RTK + 2 mm + 0.3 mm/° Typical fix time ~5 s RS4 / RS4 Pro roles Base and rover; LoRa / UHF / LTE class connectivity RS4 Pro cameras Dual Full HD global-shutter cameras for AR stakeout & photo measure RX2 role Pocket rover; RTCM3 via NTRIP; Bluetooth to phone/tablet Ingress protection IP68 class (model-dependent — confirm on datasheet)

Emlid Reach price in Australia

D1 Store stocks official Emlid Reach Main Items (current D1 pricing):

Configuration Role Price (AUD) Emlid Reach RX2 Pocket NTRIP rover + tilt $4,099.00 Emlid Reach RS4 All-band base & rover $6,999.00 Emlid Reach RS4 Pro RS4-class + dual cameras $8,399.00

Found it cheaper elsewhere in Australia? D1 Store offers Price Match on genuine local stock.

Which Emlid Reach should you choose?

• Reach RX2 ($4,099.00) — lightest rover when you already have reliable NTRIP corrections.
• Reach RS4 ($6,999.00) — full base/rover kit for independent sites and UAV GCP workflows.
• Reach RS4 Pro ($8,399.00) — same GNSS class plus cameras for AR stakeout and hard-to-reach photo measurements.

For DJI-native base/relay hardware, also compare D-RTK 3. Feed control points into DJI Terra for aerial mapping deliverables.

Why buy Emlid Reach from D1 Store?

• Australia's first and only DJI Authorised Retail Store — genuine DJI stock, not grey import
• Local Melbourne-based support team and phone line: (03) 9288 7882
• Price Match on local competitor pricing
• Physical stores across Australia plus fast nationwide delivery, free over $199

Frequently Asked Questions

How much do Emlid Reach receivers cost in Australia at D1?

At D1 Store, the Emlid Reach RX2 is $4,099.00, the Reach RS4 is $6,999.00 and the Reach RS4 Pro is $8,399.00. Prices include GST and may change. Confirm live stock before you order.

What's the difference between RX2, RS4 and RS4 Pro?

RX2 is the pocket NTRIP rover with tilt. RS4 is the full base/rover all-band receiver with radios. RS4 Pro adds dual cameras for AR stakeout and photo-based measurement on top of the RS4-class GNSS stack.

What RTK accuracy do Reach RS4 / RS4 Pro / RX2 claim?

Emlid quotes RTK horizontal 7 mm + 1 ppm and vertical 14 mm + 1 ppm, with IMU tilt compensation of RTK + 2 mm + 0.3 mm/° under specified conditions.

Can I use Emlid Reach with DJI enterprise drones?

Yes for ground control, checkpoints and independent survey workflows that feed DJI Terra or other mapping software. Reach is partner GNSS hardware, not a DJI airframe — confirm NTRIP/base setup with D1 for your job.

Does D1 Store price match Emlid Reach?

Yes. D1 Store offers a Price Match guarantee against other Australian retailers selling genuine stock — see the Price Match page for terms.

Is D1 Store an authorised retailer for these products?

D1 Store is Australia's first and only DJI Authorised Retail Store and also supplies partner enterprise GNSS such as Emlid Reach with local sales support.