LiDAR

DJI LiDAR Australia — Zenmuse L3 & Aerial Mapping Payloads at D1 Store

This is D1 Store's enterprise LiDAR hub: long-range aerial LiDAR and RGB mapping payloads that nest under surveying, corridor mapping and terrain modelling use-cases — not a single consumer SKU. D1 Store is Australia's first and only DJI Authorised Retail Store, so every Zenmuse L3 sold here is genuine stock, backed by local enterprise support, price match and Care Enterprise options where eligible.

What is DJI enterprise LiDAR at D1 Store?

Aerial LiDAR payloads mount on Matrice enterprise aircraft to capture dense point clouds for survey, infrastructure, forestry and powerline work. The live Main Item on this collection is the Zenmuse L3 — DJI's long-range LiDAR and dual 100 MP RGB mapping payload for the Matrice 400. Pair it with DJI Terra / Modify for processing, and plan Australian operations under the correct CASA rules.

Zenmuse L3 key specs at a glance

Spec Detail Payload Zenmuse L3 LiDAR + dual RGB mapping cameras Laser 1535 nm; detection up to 950 m @ 10% reflectivity (100 kHz); up to 16 returns Pulse rate Up to 2 million points per second (configuration-dependent) RGB cameras Dual 100 MP 4/3 CMOS, 28 mm equivalent, mechanical shutter System accuracy (typ.) ~3 cm vertical / 4 cm horizontal RMSE @ 120 m AGL (DJI test conditions) Ranging accuracy ±10 mm absolute (stated test conditions) Compatible aircraft DJI Matrice 400 only (requires Zenmuse L3 single-gimbal connector) Software DJI Pilot 2, DJI Terra, DJI Modify, DJI FlightHub 2 Typical use-cases Large-area survey, corridor mapping, terrain modelling, infrastructure

LiDAR price in Australia

D1 Store stocks the following live Main Item LiDAR payload (current D1 pricing):

Main Item Platform Price (AUD) Zenmuse L3 Matrice 400 payload $25,120.00

Aircraft, connectors, batteries, RTK and software licences are separate. Found it cheaper elsewhere in Australia? D1 Store offers Price Match on genuine local stock.

Which LiDAR configuration should you choose?

• Zenmuse L3 on Matrice 400 — the current flagship aerial LiDAR option when you need long-range detection, dual 100 MP RGB colourisation and centimetre-class mapping on the M400. Requires the L3-specific single-gimbal connector.
• Matrice 350 / 300 fleets — L3 is not supported; talk to D1 Enterprise about Zenmuse L2 or other survey payloads that fit your airframe and accuracy target.
• Processing stack — budget for DJI Terra (and Modify if you edit point clouds/meshes) plus RTK/PPK workflow. High-altitude survey efficiency in Australia may need CASA approvals above 400 ft AGL.

Why buy enterprise LiDAR from D1 Store?

• Australia's first and only DJI Authorised Retail Store — genuine DJI and partner stock, not grey import
• Local Melbourne-based enterprise support team and phone line: (03) 9288 7882
• DJI Care Enterprise and maintenance options for eligible platforms and payloads
• Price Match on genuine local competitor pricing — see Price Match
• Physical stores across Australia plus nationwide delivery for enterprise freight

Frequently Asked Questions

How much does the Zenmuse L3 cost in Australia?

At D1 Store, the Zenmuse L3 is $25,120. Prices include GST and may change with DJI promotions. Aircraft, the L3 single-gimbal connector, batteries and DJI Terra licences are quoted separately.

Which drone works with the Zenmuse L3?

The Zenmuse L3 is designed for the DJI Matrice 400 only, via the Zenmuse L3 single-gimbal connector on the E1 port. It is not compatible with Matrice 350 RTK or Matrice 300 RTK. Operators on those airframes typically look at Zenmuse L2 instead.

What accuracy can the Zenmuse L3 achieve?

Under DJI's published test conditions, system accuracy is about 3 cm vertical and 4 cm horizontal RMSE at 120 m AGL, with ranging accuracy around ±10 mm. Real-world results depend on flight planning, GNSS/RTK quality, vegetation and processing workflow.

Do I need CASA approval to use L3 at high altitude in Australia?

Standard recreational and many commercial rules cap operations at 400 ft AGL. The L3's large-area coverage figures often assume higher survey altitudes. Confirm current CASA requirements, RePL/ReOC status and any above-400-ft or BVLOS approvals for your mission before you fly.

Does D1 Store price match LiDAR payloads?

Yes. D1 Store offers a Price Match guarantee against other Australian retailers selling genuine stock — contact the enterprise team or see the Price Match page for current terms.

Is D1 Store an authorised DJI retailer for enterprise LiDAR?

Yes. D1 Store is Australia's first and only DJI Authorised Retail Store, so Zenmuse L3 units sold here are genuine and eligible for local support and Care Enterprise options where applicable.