Why Buy from D1 Store Try It In Store Same-Day Care Refresh Claims 70% Faster Repairs Up to 2 Years Warranty Price Match Guarantee DJI Specialists in Store
- Try It In Store Try it with a D1 Product Specialist. Same-day pickup when in stock.
- Same-Day Care Refresh Claims Buy it here and claim in-store the same day, instead of waiting 2–3 weeks.
- 70% Faster Repairs About 70% faster than the usual 2–3 week turnaround. Assessment is free.
- Up to 2 Years Warranty Products purchased from D1 Store include up to 2 years warranty*
- Price Match Guarantee Submit a price match and we match Authorised Australian Retail with the Best Price.
- DJI Specialists in Store Stores, D1 Product Specialists, and an in-house repair desk.
Advanced Mini Wireless Microphone
Performance That Speaks
Four Voices. One Clean Timeline.
All-in-One, Ready to Go
DJI Mic 3 is a compact wireless microphone system for solo creators, interviews, podcasts, events, and multi-camera production. Each 16 g transmitter can clip or attach magnetically, while the receiver brings four-source capture, onboard control, and timecode into one small rig.
D1 Store supports DJI Mic 3 for Australian creators with local stock, Australian warranty, and product help beyond setup day. Build the kit around the number of voices and cameras you actually use; expanded 4 TX, 8 RX, four-channel, and adapter workflows require separately sold hardware.
- Four Transmitters Into One Receiver for Group Recording
- 32 GB Internal Storage with 24-Bit and 32-Bit Float Recording
- Less Than One Frame of Measured Timecode Drift Over 24 Hours
- Up to 28 Hours of Total Operating Time with the Charging Case
Set the Voice Before It Reaches the Edit.
DJI Mic 3 handles level changes, tonal shaping, noise control, and receiver adjustments at capture time.
Automatic Gain for Sudden Peaks
Automatic gain is off by default. Once enabled, it manages sharp outdoor level jumps to reduce clipping before a cheer, engine, or whistle reaches the DJI Mic 3 recording.
Dynamic Gain for Steady Loudness
Dynamic mode follows quieter changes and keeps perceived volume more consistent, making DJI Mic 3 easier to place in interviews, studios, and seated conversations.
Regular Voice Tone
Regular is the clean, balanced default on DJI Mic 3. Start here when the room and microphone placement already suit the speaker.
Rich Voice Tone
Rich adds weight in the low end, giving a lighter voice more body without building that curve from scratch in post.
Bright Voice Tone
Bright lifts the upper range for added articulation when dialogue needs to cut through a busy mix or compact phone speakers.
Basic or Strong Noise Control
Noise cancelling is off by default. Choose Basic for fans, air conditioning, and indoor reverb, or Strong when traffic and crowds compete with the voice; DJI Mic 3 can apply it per transmitter or across the group.
Four Voices in. Eight Receivers in Sync.
One DJI Mic 3 Receiver can capture up to four transmitters at once, keeping a panel, round-table interview, or multi-person production on separate sources instead of mixing voices before the edit.
The main receiver can distribute audio to seven more receivers. Quadraphonic mode can output four independent tracks through supported Sony cameras with the separately sold adapter, or through supported computer software over USB.
Keep the Original. Keep the Recovery Room.
DJI Mic 3 records a clean original and an algorithm-enhanced file internally at the same time. With 32-bit float selected, quiet detail and unexpected peaks have more room for recovery than a fixed-level camera track.
Timecode is embedded in transmitter recordings and can pass through the receiver as input or output. DJI measured less than one frame of drift across 24 hours under continuous powered test conditions.
Power Behaviours That Stay Out of the Shot.
A transmitter sleeps when the receiver signal disappears, then wakes and reconnects when the link returns.
Sleep and Reconnect
A transmitter sleeps when the receiver signal disappears, then wakes and reconnects when the link returns.
Connect the Camera, Phone, or Full Production.
DJI Mic 3 moves from direct OsmoAudio capture to long-range receiver work without forcing every setup through the same cable.
OsmoAudio Direct
Connect one transmitter directly to Osmo 360, Osmo Action 5 Pro, Osmo Action 4, or Osmo Pocket 3. The receiver can stay in the case for the smallest creator setup.
Four Independent Tracks
Quadraphonic output preserves four sources as separate tracks for supported Sony cameras or compatible computer software, reducing the cleanup after a group recording.
Dual-Band Wireless
Automatic hopping between 2.4 GHz and 5 GHz gives DJI Mic 3 another route around crowded wireless environments such as trade shows and event floors.
Up to 400 m
DJI measured up to 400 m in an open, unobstructed environment with Lossless Audio off. Range changes with interference, obstacles, local frequency rules, and enabled features.
Locking Output and Live Monitoring
A locking 3.5mm TRS output protects the camera feed, while the separate 3.5mm TRRS port gives the operator a live monitor without splitting the output.
Bluetooth Direct to Phone
One transmitter can feed supported third-party recording and live-streaming apps over Bluetooth. The phone’s native camera app is not supported for this direct mode.
Small Details That Prevent a Reshoot.
1.1-inch AMOLED Control
The receiver puts gain, battery, channel mode, and status on a touchscreen, with a physical dial for fast changes during a take.
48kHz 24-bit Lossless
Lossless mode sends uncompressed audio to the receiver, trading about two hours of transmitter runtime and roughly half the maximum range.
Batch File Export
Connect the charging case by USB-C to move recordings from both transmitters to a computer or compatible phone in one pass.
5 Minutes Adds 2 Hours
Below 25% charge in DJI testing, a five-minute top-up returned up to two hours of transmitter and receiver use.
About 50 Minutes to Full
DJI Mic 3 supports 3C fast charging and takes about 50 minutes for a full charge under DJI controlled conditions.
Case Holds the Working Setup
Store two transmitters with windscreens and either magnets or clips attached, plus the receiver and cable, without stripping the kit down. Keep accessories unstacked to protect the receiver screen.
Rotatable Clip
The detachable clip rotates so a transmitter can sit sideways or inverted while its microphone angle stays useful.
Lightning Needs External Power
A Lightning phone cannot power the receiver directly. Simultaneous charging and use needs the separately sold Lightning adapter and external power.
In the Box
2 x DJI Mic 3 Transmitter- 1 x DJI Mic 3 Transmitter
1 x DJI Mic 3 Receiver
1 x DJI Mic 3 Transmitter Magnetic Charging Cable
1 x DJI Mic 3 Charging Case
1 x DJI Mic 3 Mobile Phone Adapter (USB-C)
1 x USB-C to USB-C Data Cable
1 x DJI Mic 3 Locking Audio Adapter Cable (3.5mm TRS to TRS)
2 x DJI Mic 3 Windscreen (Black/Gray)- 1 x DJI Mic 3 Windscreen (Black/Gray)
2 x DJI Mic 3 Magnet
2 x DJI Mic 3 Windscreen (Black)- 1 x DJI Mic 3 Windscreen (Black)
- 1 x DJI Mic 3 Magnet
2 x DJI Mic 3 Magnetic Clip- 1 x DJI Mic 3 Magnetic Clip
1 x DJI Mic 3 Carrying Pouch
DJI Mic 3 Compact Carrying Pouch