Clear your cart?
This removes all items. You can’t undo this.
SKU: M400 | EAN: 6937224120570
Includes FREE Standard Shipping
Exclusive FREE
D1 Store is the only place that replaces Care Refresh in store, on the spot. Bring the damaged product in with a valid plan and we swap it while you wait — instead of an average 3-day Care Refresh Express claim, or an average 2-week Care Refresh claim.
Bring the damaged product and a valid Care Refresh plan.
Exclusive in-store replacement while you wait. No 3-day Express or 2-week courier wait.
Back in the air in minutes — not the average 3-day Care Refresh Express or 2-week Care Refresh wait.
* Same-day in-store swaps are available with an eligible Care Refresh plan, whilst stocks last.
Notify me when available
We’ll email you when this item is back in stock.
Need help now?
DJI Matrice 400 has a rotating LiDAR sensor, mmWave radar, and a 6 kg payload bay for power line inspection, mapping, and emergency response.
Backed by D1 Enterprise, Australia's key DJI Enterprise Dealer. Product demos, trials, training, and lifetime support.
DJI Matrice 400 is a heavy-lift enterprise drone with a rotating LiDAR sensor, mmWave radar, and a 6 kg payload bay for power line inspection, mapping, and emergency response. Maximum payload is 6 kg. The aircraft gives crews up to 59 minutes per flight.
Rotating LiDAR reads 520,000 points per second, while high-precision mmWave radar scans six directions. Full-colour low-light fisheye vision extends obstacle sensing into darkness, rain, and fog. Together, these systems support safer, more dependable operation around power lines, emergency scenes, and complex industrial sites. The IP55 airframe operates from -20° to 50° C. Four E-Port V2 ports support up to seven payloads, so crews can change the aircraft role without changing platforms.
Long forward flight and hover endurance for search and rescue, firefighting, and large-scale mapping across power line and utility inspection.
Single, dual, and third gimbal mounting for power line inspection, mapping, and emergency response payloads across the DJI ecosystem.
Power-line-level obstacle sensing for power line inspection and utility inspection, detecting high-voltage wires even in darkness.
Smart Detection, AR projection, and real-time terrain follow for search and rescue, construction, and utility inspection situational awareness.
Automated power line following, slope routes, and geometric routes for repeatable mapping and utility inspection data capture.
RC Plus 2 Enterprise Enhanced, Cellular Dongle 2, TB100 battery, BS100 station, and D-RTK 3 for a complete power line inspection workflow.
DJI Matrice 400 gives search, rescue, and mapping crews up to 59 minutes of forward flight time with a payload, or up to 53 minutes of hovering. Wind, payload, and hover in the field reduce flight time.
The aircraft avoids large obstacles such as buildings and mountains at flight speeds of up to 25 m/s. That endurance covers long-duration search and rescue, firefighting, and large-scale mapping.
DJI Matrice 400 has a maximum payload capacity of 6 kg for mounting a single downward gimbal, dual downward gimbals, or a third gimbal connector on the underside.
Four external E-Port V2 ports mount up to seven payloads at once. That flexibility lets one aircraft cover power line inspection, mapping, and emergency response in a single sortie.
Wide, zoom, thermal, laser range finder, and NIR light for search and rescue and utility inspection.
Frame-based LiDAR, high-accuracy IMU, and 4/3 CMOS RGB mapping camera for survey and mapping.
Full-frame sensor with interchangeable lenses for photogrammetry and construction mapping.
DJI's first spotlight and loudspeaker for search and rescue and emergency response crews.
100 TOPS of computing power in a compact ~120 g unit for onboard processing.
E-Port V2 and SKYPORT V3 support for ecosystem development on the platform.
DJI Matrice 400 has an IP55 protection rating for heavy dust or rain, and is specified to operate from -20° to 50° C. That envelope keeps the aircraft on station for power line inspection and emergency response in poor weather.
DJI Matrice 400 has a rotating LiDAR sensor that reads 520,000 points per second, high-precision six-direction mmWave radar, and full-color low-light fisheye vision for obstacle sensing.
The system detects small obstacles such as high-voltage power lines across mountainous terrain, including in darkness, and senses through rain and fog for power line and utility inspection. Aircraft fusion positioning supports work near glass and wind turbines.
DJI Matrice 400 overview and key features.
Overview
DJI Matrice 400 overview and key features.
The ten-antenna system on the aircraft and the high-gain phased array antenna on the remote controller give O4 Enterprise Enhanced Video Transmission a range of up to 40 km.
DJI Matrice 400 also supports the sub2G frequency band and Airborne Relay Video Transmission. With two DJI Cellular Dongle 2 units it can switch to the stronger carrier network in urban interference or remote regions for utility inspection.
With Zenmuse H30 Series visible and thermal imaging, DJI Matrice 400 can detect vehicles, vessels, and subjects during search and rescue or routine flights.
Smart AR Projection overlays Power Line AR, Map View AR, and AR Flight Waypoint on the remote controller. Live annotations sync to DJI FlightHub 2 for search and rescue coordination. Real-time terrain follow holds consistent ground sampling distance for mapping.
DJI Matrice 400 can take off from stationary vessels and land on moving vessels by detecting landing-point patterns on the deck. That extends the aircraft to maritime inspection and emergency response.
Cruise, FlyTo, Smart Track, and POI extend inspection, emergency response, tracking, and orbit-based 3D modeling. Automated power line following with Zenmuse L2 and slope or geometric route planning support mapping and utility inspection.
Fly in direct sunlight so the crew can inspect power lines in poor weather. IP54, -20° to 50° C, sub2G and 4G hybrid transmission.
Keep video flowing in urban interference or remote regions so the crew can inspect across long utility sorties. 4G works alongside O4 Enterprise Enhanced, with mobile network connectivity for the remote controller.
Stay on station through long sorties so the crew can inspect across cold mornings. High-energy cells with up to 400 charge cycles, enhanced heat dissipation, and a self-heating system.
Hold the aircraft aloft for long-duration aerial lighting so the crew can call out to a person on the ground. Compatible with third-party tethered lighting and communication products.
Keep a fleet cycling in the field so the crew can survey and inspect without a recharge gap. One-stop charging, storage, and transport for 3× TB100 and 2× WB37 batteries. 45-minute fast charge, 36 dB Silent Mode.
Lock centimetre-level positioning for mapping and survey. Centimeter-level positioning for multiple drones simultaneously, with Rover Station Mode for high-precision aerial surveying.
MQTT-based protocol connects DJI Matrice 400 directly to third-party cloud platforms without developing an app.
Media data encryption, Local Data Mode, one-tap clear logs, and AES-256 video transmission encryption.
Cloud-based remote control of flight attitude, official payloads, remote takeoff and landing, plus slope and geometric route planning.
3D model reconstruction software with photogrammetry at its core, plus point cloud processing with Zenmuse L2.
Intelligent 3D mesh and point cloud model editing, completing the aerial survey, modeling, and sharing workflow.
E-Port V2 with USB 3.0 and 120W per port; Mobile SDK 5 with open-source production-level code samples.
D1 Enterprise offers a range of services to support your Matrice 400 fleet, from warranty and maintenance to compliance, consulting, and finance.
Additional 1-year warranty beyond standard coverage, with major parts covered by the official warranty.
Preventative maintenance programs to keep your fleet performing optimally across every mission.
Original parts, guaranteed quality, and rapid response from DJI product experts.
Complete fleet management via AVCRM integration, so you track, schedule, and maintain your entire operation.
CASA compliance, ReOC/RePL training, and operational control to keep your program audit-ready.
Introduce, grow, and mature internal drone programs with expert guidance at every stage.
Replacement units dispatched during maintenance so your operations keep running.
Optional ServiceRapid turnaround for repairs and maintenance, keeping your fleet in the air.
Optional ServiceUpgrade your fleet with trade-in value on existing equipment.
Flexible payment options for enterprise fleets to acquire the Matrice 400 on your terms.
Power line inspection, mapping, and emergency response crews put the DJI Matrice 400 to work. A sourced field story shows the result.
Cut full-property survey of 3,800 ha from about two weeks to about two days; roughly 1,000 ha per session across two ~40-min flights.
Reference: Published case studyFor a product demo or trial, leave your contact details. D1 Enterprise can help specify the right kit.
